Polyester Staple Fiber Production Line History
- Mechini ea PSF e entsoe mathoasong a bo-1970.
- Bohareng ba 1990s, re ile ra qala ho etsa lipatlisiso le ho ntshetsa pele mohala oa tlhahiso ea 100t / d;mme ka 2002, mohala ona o ile oa kenngoa tlhahisong.
- E ntlafalitse lethathamo lohle la tlhahiso ea 120t/d ka 2003.
- Ho tloha 2005 ho isa 2011, mohala oa sehlahisoa oa 150t/d o kentsoe tlhahisong ea lihlopha.
- Ka 2012, mohala oa sehlahisoa sa 200t/d PSF o ile oa sebetsa ka katleho.
- Haufinyane max.Bokhoni ba mohala o le mong: 225t/d.
- Mehala e fetang 200 e ntse e matha ka katleho lefatšeng ka bophara, moo e fetang 100 e nang le matla a maholo.
- Ho fihlela joale, sekhahla sa fiber ea boemo ba pele se ka fihla ho feta 98% mme sa fiber ea maemo a holimo e feta 95%.
Ts'ebetso ea ho phalla ha polyester spinning line ho tloha ho li-flakes tsa botlolo kapa li-chips
Li-flakes kapa li-chips tsa botlolo ea polyester - E futhumetseng le e omisitsoeng-Hopper-Screw extruder -Melt filter - Spinning beam -Metering pump-Spinning packs -Ho tima Sisteme-Spinning tunnel- Mochini oa ho nka - Capstan - Mochini oa Traverse (makotikoti a likhoele)
Ts'ebetso ea Phallo ea Polyester After-therapy Line(Tsela ea tšebetso ea Toyobo)
Creel – Mojule wa Prefeed (lirolara tse 5 + 1) – Bate ea ho qoelisoa – Rola ea ho qoelisoa – Thala Setulo sa 1 (lirola tse 5 + 1) – Thala Bate – Thala Setulo sa 2 (lirolara tse 5 + 1) – Lebokose la ho futhumatsa mouoane – Draw Stand 3 (12 rollers) – Annealer (5 rollers) – Oiling Stacker – (Trio – Tension Roller) – Pre-crimper Heating Box – Crimper – Cooling Conveyor (kapa Tow Plaiter – Dryer) – Oil Sprayer – Tension Stand – Cutter – Baler
Mokhoa oa ho Phalla ha Polyester After-therapy Line (Mokhoa oa ho sebetsa oa Fleissner)
Creel – Prefeed Module (7 rollers) – Immersion Bath – Draw Stand 1 (7 rollers) – Draw Bath – Draw Stand 2 (7 rollers) – Steam Heating Box – Annealer (18 jacket rollers) – Cooling Sprayer – Draw Stand 3 (7 rollers) - Tow Stacker - Trio - Tension Roller - Pre-crimper Heating Box - Crimper - Tow Plaiter - Dryer - Tension Stand - Cutter - Baler
Fiber Index (Bakeng sa Tšupiso)
| Che. | Lintho | Fiber e tiileng | Fiber e bohareng | Mofuta oa boea | |||||||||||||
| Boikemisetso bo Phahameng | Tloaelehileng | ||||||||||||||||
| Molemo ka ho fetisisa | Kereiti A | Ea tšoanelehang | Molemo ka ho fetisisa | Kereiti A | Ea tšoanelehang | Molemo ka ho fetisisa | Kereiti A | Ea tšoanelehang | Molemo ka ho fetisisa | Kereiti A | Ea tšoanelehang | ||||||
| 8 | Nomoro ea crimp /(pc/25mm) | M2±2.5 | M2±3.5 | M2±2.5 | M2±3.5 | M2±2.5 | M2±3.5 | M2±2.5 | M2±3.5 | ||||||||
| 9 | Crimp ratio/% | M3±2.5 | M3±3.5 | M3±2.5 | M3±3.5 | M3±2.5 | M3±3.5 | M3±2.5 | M3±3.5 | ||||||||
| 10 | Ho fokotseha ha mocheso ho 180 ℃ | M4±2.0 | M4±3.0 | M4±2.0 | M4±3.0 | M4±2.0 | M4±3.0 | M4±2.0 | M4±3.0 | ||||||||
| 11 | Khanyetso e khethehileng /Ω*cm ≤ | M5×108 | M5×109 | M5×108 | M5×109 | M5×108 | M5×109 | M5×108 | M5×109 | ||||||||
| 12 | 10% enlongation / (CN/dtex) ≥ | 2.8 | 2.4 | 2 | —- | —- | —- | —- | —- | —- | —- | —- | —- | ||||
| 13 | Phapang ea matla a phomolo /≤ | 10 | 15 | 10 | —- | —- | 13 | —- | —- | —- | —- | —- | |||||
Nako ea poso: Sep-05-2022